Coban GPS303B

Coban Gps303b

Connection Parameters

Server Address server.gp-s.net
Server IP 136.244.102.118
Server Port 47750
Supported Functions
95%
Automated Activation
100%
Server Uptime
99%

This product is compatible with our system, if you bought new or already using another gps tracking software you can transfer your device to our system online automatically

Description

Coban GPS303 series are budget GPS trackers for vehicles. By November 2015 the family include three modifications with postfixes B, F and G in their names:

  • Coban GPS303B ? the basic model, which has just three wires to connect: two for power and one for ACC status.
  • Coban GPS303F ? advanced model with multiple inputs and outputs (I/O).
  • Coban GPS303G ? similar to GPS303F, but also includes remote control for managing the alarm mode, engine cut relay and send emergency alarm.

GPS303 ?B? MODIFICATION

The modification with ?B? postfix is the basic model of the GPS303 series. With only three wires for power supply and ACC status, it does not provide the possibility to connect any other sensors or buttons, control external equipment.

GPS303B has built-in GPS and GSM antennas, dust and waterproof design.

 

LOCATION AND TRACKING

All GPS303 models are embedded with GPS chip NewStar 1315 and don?t have support of GLONASS or alternative systems.

There are only two basic tracking mode, which do not provide too much flexibility: by time interval and by distance.

As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

Also, the tracker supports turnings. It will update the positions automatically to web server once the direction is changed over pre set angle (30 degrees) to form a smooth trajectory consistent with the actual road, this function is only effective in GPRS mode.

MOBILE NETWORKS

With Quad-band GSM 2G module GPS303B can be operated all over the world.

POWER SUPPLY

External power supply might be 12V or 24V, which makes possible to install GPS303 both on cars and vans.

GPS303 also features a built-in rechargeable backup battery. When fully charged it ensures about 3-4 hours of device operation (in normal conditions).

LOCAL AND REMOTE MANAGEMENT

GPS303 trackers can be fully controlled over GPRS. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.

LED INDICATION

GPS303 has three LED indicating:

    • Backup battery charge
    • GSM/GPRS mode
    • GPS signal reception
General information
Purpose Vehicle
Installation Professional
 
Housing
Size 96x53x16 mm (3.78×2.09×0.63 in)
Weight 70 g (2.47 oz.)
Waterproof class IP6X
 
GNSS Location
GPS  
Chipset NewStar, NS-1315
Internal antenna (GNSS)  
External antenna (GNSS)  
Assisted GPS  
 
Connectivity
Cellular network type GSM Quad Band
Cellular network generation 2G
Internal antenna (Connection)  
External antenna (Connection)  
 
Interfaces
RS232 interface  
RS485 interface  
ACC/Ignition input   Feature already supported
Discrete inputs   Feature already supported
Analog inputs   Feature already supported
Impulse inputs  
Frequency inputs  
Number of inputs (all types) 4
Outputs   Feature already supported
Number of outputs 2
 
Hardware features
Built-in battery  
Battery capacity 700 mAh
Emergency button   Feature already supported
Detach sensor  
Engine block relay   Feature already supported
Non-volatile memory Optional
 
Hardware extras
Fuel level sensor reading   Feature already supported
Fuel temperature sensor reading  
Driver ID reading  
Voice listening   Feature can be supported upon request
Wireless keypad Optional Feature already supported
Engine block special control   Feature already supported
Emergency button   Feature already supported
 
Tracking features
Tracking modes Continuous
Smart power consumption  
Odometer  
ECO driving  
Location by Cell ID   Feature already supported
 
Events monitoring
External power cut off   Feature already supported
Battery low   Feature already supported
Device switched on/off  
 
Self monitoring
Network signal level  
GNSS signal level  
GNSS satellites fixed  
External power source voltage  
 
CAN/OBDII reading
CAN/OBDII reader type  
Check engine light  
 
Remote management
Server connection setup over SMS   Feature already supported
Device ID type Static (IMEI)
Remote device configuration Yes (over GPRS)
Forced GNSS location update over SMS   Feature can be supported upon request
Forced LBS location update over GPRS  
Message exchange format ASCII
Firmware update OTA  
 
Certification
CE  
FCC  
 

I have bought this product from another supplier can i use your system?

Yes exactly. You can use gp-s.net web application and mobile apps with all supported services!

How to activate or transfer my device?

Dont worry about this, we have automated activation system, just turn on your device with your own sim card we will complete the setup automatically

How long take the activation?

Its takes only few minutes, you can make instant activation, register and pay credit online,

Your cart is currently empty.

Return to shop